High Quality Medical Oxygen Regulator, Oxygen Regulator, Regulator Suppliers in China

Home > Products > Other products > cylinder valve > ZH-LB02 Medical Oxygen Regulator With Flow Meter

ZH-LB02 Medical Oxygen Regulator With Flow Meter

Product Description

Product Description
Specification
Flow Range
1 -15L/min
Output Pressure
2Bar-3Bar
Input Pressure
<150bar
Control Pressure of Safety Valve
3.5±0.5Bar

Using Scope For oxygen emergency use and for oxygen-absent patient breathing use. Using Method a.Connect oxygen-inlet screw with Oxygen cylinder tightly, then open oxygen cylinder valve; b.Insert oxygen-inhale pipe to oxygen outlet and connect it tightly; c.Screw down humidifier, add pure water until between upper and lower water line, then screw the humidifier with the cap of the humidifier tightly; d.Adjust the flow adjuster until to the flow you want, then breath oxygen by oxygeninhale pipe; e.Close the oxygen Cylinder valve when you stop oxygen breathing, then close the flow adjuster when the needle of the pressure gauge points at “ 0". Notice a.Clean the connector of the oxygen cylinder and test the connecting screw before install the oxygen Regulator. b.Make the flow meter vertical to the ground and close the flow adjuster, then open the oxygen cylinder valve slowly, when oxygen cylinder pressure shows on the pressure gauge then adjust flow of the oxygen outlet. c.Forbidden heavy quake, corrosive material and oil. d.The fixed screw of safety valve must not be screwed optionally, laypeople forbidden dismounting. Storage Store the oxygen regulator in a clean and breezy room where the relative humidity is less than 90%.

Contact us if you need more details on Medical Oxygen Regulator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Oxygen Regulator、Regulator. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Other products > cylinder valve